






Your RSHIONG-YU9 can be disabled to stop it from sharing its location. Once disabled, it will no longer report its position to Apple's Find My network, and the owner will no longer receive updates on its current location.
If you receive a notification on your mobile device that an unknown RSHIONG-YU9 has been detected near you, you can tr igger the device to ring directly from the system alert. After locating the item, follow the steps below to disable it. Once completed, the owner will no longer get location updates for this tracker, and the device will stop triggering unknown tracker alerts on your device.
1.Locate the button on the side of the Tag.
2.Press and hold the button for seven seconds. One beep will sound, and then two beeps, and then three beeps.
3.A confirmation tone from the device indicates the disable process is complete.
5.Use your fingernail or a small flat tool to pry into the side gap of the RSHIONG-YU9.
6.Carefully open the device casing.
7.Remove the internal battery.
8.Align the top clips of the upper and lower casing, then snap the device back together.
9.Hold down the button until you hear a "di" beep to power on the device.
10.After power‑on, the device will resume normal operation.
11.Use your fingernail or a small flat tool to pry into the side gap of the RSHIONG-YU9.
12.Carefully open the device casing.
13.Insert a new CR2032 coin cell battery with the positive (+) side facing up.
14.Align the top clips of the upper and lower casing, then snap the device back together.After installing the battery, keep pressing the button. The device will beep once after approximately 2 seconds, and resume normal operation upon the second beep.
This is the official operation guide for RSHIONG-YU9 trackers, fully compatible with Apple's Find My ecosystem. All operations work seamlessly with the iOS Unknown Tracker Alert feature, helping users properly handle alerts for unfamiliar tracking devices.
Copyright © 2021 - 2026 , All Rights Reserved